Zhejiang Eastern Haobo Pipes BOSSPIPE CC-GRP Jacking Pipe

ManufacturerManufacturer
Zhejiang Eastern Haobo Pipes
Product TypeProduct Type
Pipe
SupplierSupplier
Empire Infrastructure
Product SubtypeProduct Subtype
Jacking Pipe – GRP
BrandBrand
BOSSPIPE
ApplicationApplication
Non-Pressure
Product DescriptionProduct Description
CC-GRP Jacking Pipe
SystemSystem
Gravity Sewer

Scope of ApprovalScope of Approval
BOSSPIPE CCGRP jacking pipe systems for non-pressure sewerage applications, joined using flexible non-end-loadbearing joints with elastomeric seals, intended to be installed using various trenchless installation methods such as; slip lining, micro-tunnelling and pipe jacking. BOSSPIPE jacking pipes with nominal pipe diameters ranging from OD 324 to OD 2046. BOSSPIPE jacking pipes are manufactured with jacking loads ranging from 150 kN to a maximum of 10,000 kN; a nominal pressure class ranging from PN 1 to 32 and stiffness rating ranging from SN 20,000 to SN 1,000,000.
Three types of joints available for the BOSSPIPE jacking pipe, each with a coupling mounted onto one end of the pipe and an EPDM elastomer that seals the pipe, as follows:
(a) Flush Grade 316 Stainless Steel coupling - used as standard for smaller and medium diameter pipes (i.e. DN 350 up to and including DN 1400)
(b) Flush GRP Filament Wound coupling (FWC) - used as standard for BOSSPIPE jacking pipes (DN350 up to and including DN2000).
(c) Flush GRP coupling - used with larger dia GRP pipe although available from DN 350 to DN 2000
GRP fittings used with BOSSPIPE jacking pipe are fabricated from sections of straight pipe, cut to length, joint wrapped externally and internally with additional fibre reinforcement in accordance with ISO 10467. GRP fittings are supplied with spigot ends suitable for connection to the BOSSPIPE jacking pipe using GRP FWC couplings. Manufacturer's recommendation to use minimum stiffness SN 32,000 for jacking application.
Approval expiry date 3 Nov 2021
Pressure Rating(PN) / Stiffness(SN)Pressure Rating(PN) / Stiffness(SN)
PN 1 to 32; stiffness min SN 32,000 to SN 1,000,000
SizeSize
(a) DN 300 to DN 2000
(b) Pipes are produced in standard length of 1, 2, 3 and 6m
JointingJointing
Flush SS316, Flush GRP FWC and Flush GRP Couplings
Special Condition(s)Special Condition(s)

Supplier Product CodeSupplier Product Code
MRWA Standard DrawingMRWA Standard Drawing
MRWA-S-103, MRWA-S-208
Model NumberModel Number
Relevant Industry Standard(s)Relevant Industry Standard(s)
(a) ISO 25780 – Plastic piping systems for pressure and nonpressure water supply, irrigation, drainage or sewer - Glassreinforced thermosetting plastics (GRP) systems based on
unsaturated polyester (UP) resin – Pipe with flexible joints
intended to be installed using jacking techniques
(b) ISO 10467 Plastics piping systems for pressure and non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
WSAA Product Appraisal NumberWSAA Product Appraisal Number
PA 1607 Issue 2
WSAA Published DateWSAA Published Date
10/12/2018
WSAA Expiry DateWSAA Expiry Date
WSAA Product SpecificationWSAA Product Specification
WSA PS 205J Centrifugally Cast Glass Reinforced Plastics (CC-GRP) Pipes for Pressure and Non-Pressure Applications – Water Supply and Sewerage – Installed Using Trenchless Installation Methods

Approvals

Indicates approval

Barwon Water

Indicates approval

Greater Western Water

Indicates approval

Central Highlands Water

Indicates approval

Coliban Water

Indicates approval

TasWater

Indicates approval

Goulburn Valley Water

Indicates approval

South East Water

Indicates approval

Lower Murray Water

Indicates approval

Yarra Valley Water

Welcome to LWC Communities!